Multi-line 2 Utility Software v.1.x.

1.43.0

26/04/2013

This software applies to the following DEIF products:

• Multi-line 2 - AGC v.2.xx
• Multi-line 2 - GPC v.2.xx
• Multi-line 2 - GPU v.2.xx
• Multi-line 2 - PPU v.2.xx
• Multi-line 2 - BGC
• Multi-line 2 - MDR
• Multi-line 2 - EC-1/GC-1
• Multi-line 2 - PPM v.2.xx
• Multi-line 2 - AGC v.1.xx

New features:

• Inclusion of an EULA in the installation script.
• Option N configuration tool added to the software package (launchable from USW 1)

Changes:

• Support for Gempac 2.60.01.43.0

1.42.0

07/10/2011

New features

• USB driver for 64 bit Windows XP, Vista or 7.

Changes

• Trending and data tracer improvements.
• Improved support of serial to tcp-ip converter.
• Irrelevant log columns not included when exporting logs to an Excel file.
• Alarm entries updated correctly after Logs retrieva

1.41.0

02/09/2010

• Support of “Special VG” 2.32.0

1.40.44

01/09/2009

New features:

• Data tracing of VDO measurements added for BGC units

Changes:

• Other minor adjustments 

1.40.23

18/02/2009

• Configuration files updated for EC-1/GC-1 (”remote start pulse” issue fixed) 
• Trending improvements 
• Value rounding issue for parameters setpoint fixed 
• Scaling of plant view instruments improved for high voltage values 

1.40.116

15/07/2008

New features:

• New BGC 2.32.0 parameters
• Views for ADEC support 

1.4.0.115

27/03/2008

•  Support for additional parameters.

1.4.0.114

11/01/2008

• Writing of parameters to BGC versions 2.10.0 – 2.31.3 updated.

1.4.0112

04/12/2007

• Support of PPM 2.52

1.4.0.111

14/05/2007

New features:

• Ec-1/GC-1 new digital input function, remote puls start
• EC-1/GC-1 new digital input function, remote puls stop
• EC-1/GC-1 new relay output function, auto mode indication

Changes:

• Updated PPM parameterfile.
• Updated GPU parameterfile
• Updated BGC parameterfile

1.4.0.109

01/02/2007

Changes:

• Support of OEM customer updated.

1.40.106

16/10/2006

New feature:

• Configuration of N option added.
• Option EF5 added.
• Option A4 handling updated.

1.40.105

26/09/2006

New feature:

• Support of GC-1 customised products 

1.40.102

22/08/2006

New feature:

• Support of PPU/GPC with synchronization of gen-set over step-up-transformer

1.40.92

02/08/2006

Changes:

• EC-1 / GC-1 parameter file updated
• GC-1 Plant view updated
• BGC M-Logic command adjusted

1.40.98

06/06/2006

New features:

• USW support of USB connection.

Changes:

• Configurable input "MB spring load" and "GB/TB spring load" supported for AGC.
• Parameter file updated for AGC.
• Initial USW connection sequence modified

1.40.94

27/03/2006

Changes:

• Updates made in MLogic for AGC.

1.40.93

08/03/2006

Changes:

• BGC parameter file updated.
• Frequency scaling for EC-1 / GC-1 updated.
• Input / output function updated.

1.40.91

12/01/2006

New features:

• Auto reset added for BGC 2.20.0 (Self-acknowledge)
• Number of languages to download in the ML-2 unit can be selected by the user. Support for BGC 2.20.0 and later. Support for AGC / AGC Mains 2.33.0 and later.
• Printout for views, inputs, outputs, mlogic.
• Support for PPM. 

Changes:

• Consistency check updated.
• Printout of parameters updated.
• M-Logic updated.
• View download updated.
• Various parameter-, Input-, Mlogic- and view-files updated.

1.40.86

29/11/2005

Changes:

• EC-1 / GC-1 parameterlist updated.
• Plant view for EC-1 / GC-1 updated.
• Translation symbol table added for AGC 2ce.
• Boot mode download for EC-1 / GC-1 updated.
• Consistency check and parameter download updated.
• Download of MLogic files updated.
• AGC xml files updated.
• Download of GSM phone numbers updated.

1.40.82

03/11/2005

New features:

• Support for AGC 2ce
• Support for CAN IO Box

Changes:

• BGC parameterlist updated.
• BGC analogue input 1-4 readings added.
• BGC MLogic updated.
• BGC Input "Reset analogue Gov." renamed to "Reset ana. GOV/AVR".

1.40.80

05/10/2005

New features:

• Support for GC-1
• Support for EC-1 option H1

Changes:

• BGC parameterlist updated.
• Data Tracer updated.
• Updates for AGC 2.3x.x

1.40.65

04/07/2005

New features:

• Support for EC-1
• Configurable outputs added
• Cable supervision added
• Support of MDR-2 Option C4 block protection added

Corrections:

• Pointer graph on Plant view updated

1.40.66

04/05/2005

Changes:

• Adjustments regarding storing of parameter file made
• Power graph on plant view updated for ML-2 AGC

1.40.57

02/02/2005

New features:

• Updated to support BGC 2.00.0
• Handling of AGC 1.50.0 and older updated.

1.40.55

14/01/2005

New features:

• Option M13 2 added for BGC
• MAN and BLOCK mode selection added for AGC in MLogic.
• MLOGIC version 1002 needed to obtain functionality.
• Option H5 and H6 for AGC added
  Support new features in AGC regarding mode and absolute versus relative running hour calculation

Changes:

• Configuration of input for standard ML2 improved

1.40.48

30/11/2004

New features:

• Support of AGC 2.10

Changes:

• Other minor adjustments

1.40.37

21/06/2004

New features:

• BGC interface extended

Changes:

• Option dependencies adjusted
• Option Y4 added to BGC
• Option H4 settings adjusted

1.40.36

05/05/2004

New features:

• Configurable inputs added for AGC Mains
• More digital inputs available for MLogic

1.40.35

14/04/2004

New features:

• Support of new comm. options added (H6 Cummins Engine Interface Communication (EIC) and H5 CAN EIC)
• Update button for I/O status implemented

Changes:

• Adjustments for support of Std. Application version 2.30
• Adjustments for support of AGC application version 2.00
• Minor text changes

1.40.29

19/01/2004

Changes

• Option M20 is supported for PPU/GPC
• Handling of "Block loss of mains" configuration
• Default communication port is set to no. 1
• Date format is matching ML-2 display format
• Possibility for re-use of old parameter-file extended
• Text in edit dropdown box changed from 'relay' to 'output'
• Logic configurations possibilities extended
• Possibilities for configuration of views are extended for the BGC
• Extensions for support of new functions in BGC is added

1.40.26

27/11/2003

Changes:

• Handling for Texts for engine comm. in BGC added
• Viewing MDR-2 data is improved
• AGC Option A2 is corrected
• Option matrix is trimmed
• Menu 4960 added for voltage trip
• Spelling of 'Emergency' changed
• Parameters for AGC option C2 is added

1.40.19

30/07/2003

• Support of MDR-2 added
• BGC interface extended
• Parameter file for PPU software adjusted
• Added energy measurement to views
• Inhibit-configuration functionality extended for some products

1.40.14

06/07/2003

• Some ‘View’-possibilities are changed
• BGC functionality adjusted 

1.40.9

03/06/2003

Changes:

• XML files updated
• Prepared for handling BGC applications

1.40.6

27/05/2003

Changes:

• XML files updated
• Parameter file for PPU/GPC/GPU applications changed

1.40.5

23/05/2003

New features:

• Failclass is supported for AGC-products
• RUN as enable-parameter implemented for AGC-products
• Parameter list updated for AGC-products

1.40.0

02/03/2003

New features:

• Performance improved regarding PPU/GPU/GPC
• Layout adjusted for PPU/GPU/GPC

1.30.84

11/10/2002

New features:

• Performance improved regarding PPU/GPU/GPC

1.30

25/09/2002

New features

• All ML-2 units are now supported (AGC+PPU+GPU+GPC)
• Improved trending
• Improved option handling
• Improved IO-handling
• Improved user interface 
• Version Info -file added.
• Settings files updated - must be reinstalled.

1.22

09/04/2002

New features:

• Ready for new feature in ml-2 std ver 1.60.x

Corrections:

• Problem with download under Win95/98 has now been fixed.

1.20

21/11/2001

New features:

• Ready for option EF
• Font in print changed to ANSI_FIXED_FONT
• Edit of view windows.

1.10

12/10/2001

New features:

• Handling of option M1
• Print function
• Double click on a '.ml2' file opens the file
• Restore window size when started

1.03

22/08/2001

New features:

• Can handle timers with 1/100 resolution.
• New I/O dialog.
• Ready for options in std. V 1.45.