N-options firmware

您即将下载 N-options firmware

您已选择下载我们的软件。

几秒钟内，您将收到一封包含下载链接的电子邮件。

如果使用软件有问题，请联系support@deif.cn.

诚挚的祝福，

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

本软件适用于以下DEIF产品

您即将下载 2.41.0

与上一版本相比，主要更新如下：

Corrections:
        - Dropbear (SSH server) updated from version 47 to version 74
        - EtherNet/IP object 6E + 6F updated
- SSH key generation changed to single thread to avoid requirement for double boot after enabling SSH server

版本号 发布日期 描述

2.41.0

07/11/2017

Corrections:
        - Dropbear (SSH server) updated from version 47 to version 74
        - EtherNet/IP object 6E + 6F updated
- SSH key generation changed to single thread to avoid requirement for double boot after enabling SSH server

2.40.1

04/06/2015

Corrections:

  • Some modbus registers were updated slowly and some not at all. Now all registers are updated as fast as they used to.

2.40.0

12/02/2015

New features:

  • Added support for adjustable log sizes (DM4-Marine Only)
  • Added new data logger which can log from configurable Modbus area to flash (AGC 4 only)
  • Added new LVRT logger which can save LVRT data to flash (AGC 4 only)
  • Added support for NTP time synchronization including time zones and daylight saving
  • Added support for SSL/StartTLS protocols for SMS/Email service (now you can use services like gmail and hotmail for email transmission)

Corrections:

  • Improved stability on all N-option features
  • Fixed several problems stopping the Modbus server (you would have to restart the unit to recover)
  • Improved startup process (a power cycle during startup could overwrite flash and  stop Modbus TCP/IP, Ethernet IP, SMS/mails service)
  • Improved stability when downloading new application software to controller via TCP
  • Ethernet/IP is now default disabled. (you can enable it via N-Option tool)

2.30.0

25/08/2014

New features:

  • Support of webarm hardware with new flash’s mounted. No changes to user interface.
  • New USW released v3.39.0 to support firmware download of webarm hardware with new flash.

2.20.0

19/01/2014

New features:

  • Ip address, gateway address and netmask can be set either via the H8 modbus interface or by the Display Unit.
  • Flashing of the (H8) application code is possible over tcp/ip

Corrections:

  • Issue regarding incorrect alarm and event info is fixed.
  • Issue regarding missing reboot of webarm module when downloaded firmware to H8 is fixed.

2.10.0

15/04/2013
  • EtherNet/IP has been implemented.

2.00.3

12/04/2012
  • New renamed image which enable download into target.

2.00.3

30/03/2012

Corrections:

  • Modbus server accept modbus id's between 0-255

1.03.0

16/10/2008

New features:

  • Support for AGC-3.3x Application software

0.00.0

15/10/2008
  • Support for AGC-3.3x.x Application software

在此页面，您可以下载产品的更新软件，并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意，用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此，本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址，以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用，也不得出售给任何第三方。

最新版本，功能齐全

我们始终建议您安装最新版本的软件，以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题，请随时致电丹控电气(上海)有限公司，电话: +86 21 68796200，或者发送电子邮件至support@deif.cn, 我们随时为您服务。

更多信息